Showing posts with label news. Show all posts
Showing posts with label news. Show all posts

Monday, May 9, 2011

Fusion scientists gear up to learn how to harness plasma energy

Fusion scientists gear up to learn how to harness plasma energy

Enlarge

(PhysOrg.com) -- Researchers working on an advanced experimental fusion machine are readying experiments that will investigate a host of scientific puzzles, including how heat escapes as hot magnetized plasma, and what materials are best for handling intense plasma powers.


Scientists conducting research on the National Spherical Torus Experiment (NSTX) at the U.S. Department of Energy’s PrincetonPhysics Laboratory (PPPL) have mapped out a list of experiments to start in July and run for eight months. The experimental machine is designed to deepen understanding of how plasmas can be mined for energy.

A major topic of investigation by scientists for the coming round of experiments will be the issue of transport– how plasma energy and particles escape the machine. Of particular interest is transport near the plasma edge where the temperature can reach several million degrees Centigrade within a few centimeters. The plasma edge region is very important, since it has a strong influence on the temperature in the even hotter plasma core. The edge is also the region where the plasma must be cooled to lower temperature so it doesn’t damage the walls that confine the experiment.

“We have made a lot of progress already on the machine,” said Jonathan Menard, a principal research physicist and program director for NSTX at the laboratory.“And these experiments will push us further in understanding these mechanisms more fully.”

Menard made the remarks at the close of the four-day NSTX Research Forum, held March 15 to 18 at PPPL, where 55 team members from 17 institutions gathered to focus on experimental research plans and priorities.

Masayuki Ono, a principal research physicist who heads the NSTX department at PPPL, characterized the resulting plan as“highly thoughtful and exciting.”“The planning process,” he added,“is particularly important this year.” He noted that the coming run will represent the research team’s last opportunity to conduct experiments for several years on the device before machine operation is paused to enable a major device upgrade between 2012 and 2014.

Among several other topics, researchers also will focus on the potential of lithium to blanket the hot ionized gas produced in fusion reactions. A major question in magnetic fusion is how to make the plasma and its surrounding walls work well together. For example, if the plasma is too hot when it touches the wall, it can damage it in ways that are difficult to control. One possible solution is to make the wall a liquid, and lithium is special because it liquefies at relatively low temperature, and it does not easily enter hot plasma. Further, lithium has the special property of absorbing particles that hit it so that much less cold gas enters the plasma. As a result, the edge temperature can be increased, turbulence is reduced, and the whole plasma stays hotter–three important characteristics for the creation of fusion energy. Experimenters are actively preparing to cover the floor of the machine with molybdenum tiles that will then be coated with lithium.“We are trying to get more aggressive with this approach of improving the walls that surround the plasma,” Menard said.

Experiments on the NSTX, the largest of the lab’s experiments, began in 1999. The plasmas in NSTX are, like most fusion experiments, confined using magnetic fields and walls designed to withstand the heat from plasmas with temperatures that exceed 100 million degrees Centigrade. Unlike other machines which confine plasmas in a doughnut-like shape, the plasmas in NSTX are spherical in shape with a hole through the center.

PPPL, in Plainsboro, N.J., is devoted both to creating new knowledge about the physics of plasmas– ultrahot, charged gases– and to developing practical solutions for the creation of fusion energy. Through the process of fusion, which is constantly occurring in the sun and other stars, energy is created when the nuclei of two lightweight atoms, such as those of hydrogen, combine in plasma at very high temperatures. When this happens, a burst of energy is released, which could theoretically be used to generate electricity.


Source

Sunday, May 8, 2011

Simulating tomorrow's accelerators at near the speed of light

Simulating tomorrow's accelerators at near the speed of light

Enlarge

(PhysOrg.com) -- As conventional accelerators like CERN's Large Hadron Collider grow ever more vast and expensive, the best hope for the high-energy machines of the future may lie in"tabletop"accelerators like BELLA (the Berkeley Lab Laser Accelerator), now being built by the LOASIS program at the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab). BELLA, a laser-plasma wakefield accelerator, is remarkably compact. In just one meter a single BELLA stage will accelerate an electron beam to 10 billion electron volts, a fifth the energy achieved by the two-mile long linear accelerator at the SLAC National Accelerator Laboratory.

But realizing the promise of laser-plasma accelerators crucially depends on being able to simulate their operation in three-dimensional detail. Until now such simulations have challenged or exceeded even the capabilities of supercomputers.

A team of researchers led by Jean-Luc Vay of Berkeley Lab’s Accelerator and Fusion Research Division (AFRD) has borrowed a page from Einstein to perfect a revolutionary new method for calculating what happens when a laser pulse plows through a plasma in an accelerator like BELLA. Using their“boosted-frame” method, Vay’s team has achieved full 3-D simulations of a BELLA stage in just a few hours of supercomputer time, calculations that would have been beyond the state of the art just two years ago.

Not only are the recent BELLA calculations tens of thousands of times faster than conventional methods, they overcome problems that plagued previous attempts to achieve the full capacity of the boosted-frame method, such as violent numerical instabilities. Vay and his colleagues, Cameron Geddes of AFRD, Estelle Cormier-Michel of the Tech-X Corporation in Denver, and David Grote of Lawrence Livermore National Laboratory, publish their latest findings in the March, 2011 issue of the journal Physics of Plasma Letters.

Space, time, and complexity

The boosted-frame method, first proposed by Vay in 2007, exploits Einstein’s Theory of Special Relativity to overcome difficulties posed by the huge range of space and time scales in many accelerator systems. Vast discrepancies of scale are what made simulating these systems too costly.

“Most researchers assumed that since the laws of physics are invariable, the huge complexity of these systems must also be invariable,” says Vay.“But what are the appropriate units of complexity? It turns out to depend on how you make the measurements.”

Laser-plasma wakefield accelerators are particularly challenging: they send a very short laser pulse through a plasma measuring a few centimeters or more, many orders of magnitude longer than the pulse itself (or the even-shorter wavelength of its light). In its wake, like a speedboat on water, the laser pulse creates waves in the plasma. These alternating waves of positively and negatively charged particles set up intense electric fields. Bunches of free electrons, shorter than the laser pulse,“surf” the waves and are accelerated to high energies.

This video is not supported by your browser at this time.

A simulation of laser-plasma acceleration in the laboratory frame. The wavefronts of laser light are the red and blue disks at right; the fields in the wake are colored from pale blue (accelerating) to orange (decelerating). Electrons accelerated by the first of many buckets in the wake are shown in white at right. Both the laser and the wakefield buckets must be resolved over the entire domain of the plasma, requiring many cells and many time steps. Researchers often use a simulation window that moves with the pulse, but this is not a true transformation of frame and reduces only the multitude of cells, not the multitude of time steps.

“The most common way to model a laser-plasma wakefield accelerator in a computer is by representing the electromagnetic fields as values on a grid, and the plasma as particles that interact with the fields,” explains Geddes, a member of the BELLA science staff who has long worked on laser-plasma acceleration.“Since you have to resolve the finest structures– the laser wavelength, the electron bunch– over the relatively enormous length of the plasma, you need a grid with hundreds of millions of cells.”

The laser period must also be resolved in time, and calculated over millions of time steps. As a result, while much of the important physics of BELLA is three-dimensional, direct 3-D simulation was initially impractical. Just a one-dimensional simulation of BELLA required 5,000 hours of supercomputer processor time at Berkeley Lab’s National Energy Research Scientific Computing Center (NERSC).

Choosing the right frame

The key to reducing complexity and cost lies in choosing the right point of view, or“reference frame.” When Albert Einstein was 16 years old he imagined riding along in a frame moving with a beam of light– a thought experiment that, 10 years later, led to his Theory of Special Relativity, which establishes that there is no privileged reference frame. Observers moving at different velocities may experience space and time differently and even see things happening in a different order, but calculations from any point of view can recover the same physical result.

Among the consequences are that the speed of light in a vacuum is always the same; compared to a stationary observer’s experience, time moves more slowly while space contracts for an observer traveling near light speed. These different points of view are called Lorentz frames, and changing one for another is called a Lorentz transformation. The“boosted frame” of the laser pulse is the key to enabling calculations of laser-plasma wakefield accelerators that would otherwise be inaccessible.

This video is not supported by your browser at this time.

A simulation of the same system in the boosted frame of the wake, moving at near lightspeed. Space has contracted, so that the laser wavelengths and the buckets in the wake have similar proportions. Time has stretched, so that first the laser interacts with the plasma, then the buckets are formed one at a time, and finally the electron beam is accelerated. Because of the separation of events in time, the laser has already left the plasma (in yellow rectangle) when the bucket accelerates the beam. Relatively few time steps are needed to model the events, which means less computer time.

A laser pulse pushing through a tenuous plasma moves only a little slower than light through a vacuum. An observer in the stationary laboratory frame sees it as a rapid oscillation of electromagnetic fields moving through a very long plasma, whose simulation requires high resolution and many time steps. But for an observer moving with the pulse, time slows, and the frequency of the oscillations is greatly reduced; meanwhile space contracts, and the plasma becomes much shorter. Thus relatively few time steps are needed to model the interaction between the laser pulse, the plasma waves formed in its wake, and the bunches of electrons riding the wakefield through the plasma. Fewer steps mean less computer time.

Eliminating instability

Early attempts to apply the boosted-frame method to laser-plasma wakefield simulations encountered numerical instabilities that limited how much the calculation frame could be boosted. Calculations could still be speeded up tens or even hundreds of times, but the full promise of the method could not be realized.

Vay’s team showed that using a particular boosted frame, that of the wakefield itself– in which the laser pulse is almost stationary– realizes near-optimal speedup of the calculation. And it fundamentally modifies the appearance of the laser in the plasma. In the laboratory frame the observer sees many oscillations of the electromagnetic field in the laser pulse; in the frame of the wake, the observer sees just a few at a time.

Not only is speedup possible because of the coarser resolution, but at the same time numerical instabilities due to short wavelengths can be suppressed without affecting the laser pulse. Combined with special techniques for interpreting the data between frames, this allows the full potential of the boosted-frame principle to be reached.

“We produced the first full multidimensional simulation of the 10 billion-electron-volt design for BELLA,” says Vay.“We even ran simulations all the way up to a trillion electron volts, which establishes our ability to model the behavior of laser-plasma wakefieldstages at varying energies. With this calculation we achieved the theoretical maximum speedup of the boosted-frame method for such systems– a million times faster than similar calculations in the laboratory frame.”

Simulations will still be challenging, especially those needed to tailor applications of high-energy laser-plasma wakefield accelerators to such uses as free-electron lasers for materials and biological sciences, or for homeland security or other research. But the speedup achieves what might otherwise have been virtually impossible: it puts the essential high-resolution simulations within reach of new supercomputers.


Source

Saturday, May 7, 2011

Image: Pretty in pink

Pretty in Pink

Enlarge

(PhysOrg.com) -- Inside the Plasma Spray-Physical Vapor Deposition, or PS-PVD, ceramic powder is introduced into the plasma flame, which vaporizes it and then condenses it to form the ceramic coating.

The PS-PVD rig at NASA's Glenn Research Center uses new technology to create super thin ceramic coatings, which are being developed to protect high efficiency engines. The coatings created in the PS-PVD rig are thinner and more complex than those previously available.

The PS-PVD rig uses a system of vacuum pumps and a blower to remove air from the chamber, reducing the pressure inside to fraction of normal atmospheric pressure. The plasma flame is extremely hot and reaches 10,000 degrees Celsius.is introduced from the torch into the plasma flame. The plasma vaporizes the ceramic powder, which then condenses 5 feet away from the torch onto the component to form the ceramic coating.

Plasma--not a gas, liquid or solid--is the fourth state of matter and often behaves like a gas, except that it conductsand is affected by magnetic fields. On an astronomical scale, plasma is common. The sun is composed of plasma, fire is plasma, fluorescent and neon lights contain plasma.’s PS-PVD rig is one of only two such facilities in the country and one of four in the world.


Source

Friday, May 6, 2011

NRL scientists focus on light ions for fast ignition of fusion fuels

Scientists at the Naval Research Laboratory Plasma Physics Division demonstrate significant progress in the efficiency and cost effectiveness of light ions in the fast ignition of fusion targets. Light ions such as lithium or carbon are easier to produce technologically and the ion beam properties can be manipulated and tailored best to suit the necessary requirements for fast ignition.

The fast ignition concept has been conceived as an alternative to other approaches forenergy. In the fast ignitor scenario a high-energy particle beam, driven by an ultrashort pulse laser, is deposited into a pre-compressed deuterium-tritium (DT) fuel capsule and creates a 'hot spot' with temperature and density parameters suitable for ignition, approximately 10 kiloelectron volts (keV).

Initially, the easiest path for ignition was taken using electrons, but it was soon recognized that numerous problems such as instabilities exists. The next logical step was to use ions, more specifically, protons. Subsequent experiments demonstrated that protons could be accelerated to relevant energies with conversion efficiencies of 5 to 10 percent and they were proposed as an alternative to relativistic electrons. However, the number of protons required for fast ignition is in order of magnitude two times greater than that of light ions that have aof laser energy into ions of up to 25 percent.

"Presently, all efforts in the direction of fast ignition focus entirely on protons, but this continues to be plagued by problems,"said Dr. Jack Davis."Our research strongly indicates that the use of light ions, heavier than protons, in the lithium to aluminum range is a path in the right direction for ignition."

For ions of the appropriate range, thecan be deposited directly in the fuel, with high efficiency. In general, ion beams offer the advantage of more localized energy deposition, improved beam focusing, straight line trajectory while traversing the DT fuel, maximum energy deposition at the end of their range and suppression of the various kinds of instabilities.

The Ion stopping power— the gradual energy loss of fast particles as they pass through matter— results in a quadratic increase in the required ion kinetic energy relative to atomic number, but a decreasing number of these ions is needed to deliver the fast ignition hot spot energy, translating into a decreased irradiated spot size on the coupling target. The ionization density (number of ions per unit of path length) produced by a fast charged particle along its track increases as the particle slows down. It eventually reaches a maximum called the Bragg peak close to the end of its trajectory. After that, the ionization density dwindles quickly to insignificance.

Other considerations such as tailoring the ion energy and angular distribution, which are responsible for ion beam focusing anddensity deposition in time and space, may turn out to be more important for the practical realization of the fast ignition.


Source

Thursday, May 5, 2011

Plasma nanoscience needed for green energy revolution

A step change in research relating to plasma nanoscience is needed for the world to overcome the challenge of sufficient energy creation and storage, says a leading scientist from CSIRO Materials Science and Engineering and the University of Sydney, Australia.

Professor Kostya (Ken) Ostrikov of theCentre Australia, CSIRO Materials Science and Engineering, has highlighted, in IOP Publishing'sJournal of Physics D: Applied Physics, the unique potential of plasma nanoscience to control energy and matter at fundamental levels to produce cost-effective, environmentally and human health friendlyfor applications in virtually any area of human activity.

Professor Ostrikov is a pioneer in the field of plasma nanoscience, and was awarded the Australian Future Fellowship (2011) of the Australian Research Council, Walter Boas Medal of the Australian Institute of Physics (2010), Pawsey Medal of the Australian Academy of Sciences (2008), and CEO Science Leader Fellowship and Award of CSIRO (2008) on top of gaining seven other prestigious fellowships and eight honorary and visiting professorships in six different countries.

He said:"We can find the best, most suitable plasmas and processes for virtually any application-specific nanomaterials using plasma nanoscience knowledge.

"The terms 'best' and 'most-suitable' have many dimensions including quality, yield, cost, environment and human friendliness, and most recently,."

Plasma nanoscience involves the use of plasma– an ionised gas at temperatures from just a few to tens of thousands Kelvin– as a tool to create and process very small (nano) materials for use in energy conversion, electronics, IT, health care, and numerous other applications that are critical for a sustainable future.

In particular, Ostrikov points out the ability of plasma to synthesise carbon nanotubes– one of the most exciting materials in modern physics, with extraordinary properties arising from their size, dimension, and structure, capable of revolutionising the way energy is produced, transferred and stored.

Until recently, the unpredictable nature of plasma caused some scientists to question its ability to control energy and matter in order to construct nanomaterials, however Ostrikov draws on existing research to provide evidence that it can be controlled down to fundamental levels leading to cost-effective and environmentally friendly processes.

Compared to existing methods of nanomaterials production, Ostrikov states that plasma can offer a simple, cheaper, faster, and moreefficient way of moving"from controlled complexity to practical simplicity"and has encouraged researchers to grasp the opportunities that present themselves in this field.


Source

Wednesday, January 19, 2011

Imaging of Alfven waves and fast ions in a fusion plasma

Fusion plasmas in the laboratory typically reach 100 million degrees. These high temperatures are required to ignite the hydrogen plasma and maintain the fusion burn by the production of high-energy alpha particles. One challenge for a fusion reactor is how to contain the alpha particles in the vessel long enough for the particles to efficiently heat the hydrogen plasma. One way that these alpha particles can escape the fusion chamber prematurely is by exciting high frequency Alfven waves and riding these waves to the vessel walls, like a surfer rides a wave to the beach.

While it is easy to sit on the seashore and watch surfers riding waves to the beach, it is far more challenging to see theriding Alfvén waves to the walls of a fusion reactor. Recently, researchers have provided the first 2-D visualization of the elegant 3-D spiral pattern of these Alfvén waves together with the observation of the energetic particles that ride these waves to the walls of the reactor. The breakthrough allowing the measurement of these Alfvén waves is the development of a highly sensitive camera designed to measure minute temperature fluctuations inside thethat indicate the presence of these Alfvén waves. These results will be presented at the American Physical Society Division of Plasma Physics 52nd annual meeting, November 8󈝸, in Chicago, Illinois by researchers from DIII-D National Fusion Facility and the ASDEX Upgrade tokamak.

In the experiments on the DIII-D tokamak, beams of high-energy particles are injected into the plasma to simulate the alpha particles expected in a fusion reactor. These particles then excite Alfvén waves similar to what's expected in a reactor and under the right conditions they can ride these waves to the wall. By studying the behavior of the energetic particles and Alfvén waves, we can learn a great deal about what to expect in a fusion reactor.

Unprecedented images of these Alfvén waves have recently been obtained by recording the variation in the plasma temperature using a special camera. These cameras are basically heat detectors, much like IR cameras used to image thermal objects at night. However the camera developed on DIII-D is optimized for resolving tiny variations in the plasma temperature by measuring the"heat"radiated in the form of microwaves, much like the radiation emitted by a microwave oven.

The images show that the fusion plasma has a torus shape and the plasma waves spiral around the torus. Many features of the theoretical prediction of these waves are observed in the images, such as the location of the waves in the plasma, the wavelength of the wave and the twisting spiral pattern of the wave.

In addition to these remarkable images of the Alfvén waves, new measurements have been obtained of the particles that excite these waves and ride the waves to the walls.

Recently, a technique has been developed to directly measure ions that strike the wall after riding the Alfvén waves out of the plasma. A phosphor screen is used that lights up when struck by these escaping particles and a camera is used to image the phosphor. The pattern of the light on the screen provides specific information on the energy and direction of the particles arriving at the wall. Fast images of the phosphor show bunches of beam particles arriving to the wall synchronized with the arrival of the Alfvén waves. This is similar to watching multiple surfers riding a single wave, where these surfers all arrive at the beach together.

Thanks to the focused effort of a large international collaboration, modeling efforts to simulate these recent experiments are now able to reproduce many of the features of both the Alfvén wave structure and the particle losses. These same codes are presently being used to predict the presence of Alfvén eigenmodes in ITER and initial results show that modes similar to those observed in DIII-D and ASDEX-Upgrade will be present. A key challenge for the future is to find ways of suppressing these Alfvén waves in aor at least minimizing their effect on the alpha particles.


Source

Tuesday, January 18, 2011

3D model of the ionosphere F-region developed by NRL scientists

3D model of the ionosphere F-region developed by NRL scientists

Enlarge

The first global simulation study of equatorial spread F (ESF) bubble evolution using a comprehensive 3D ionosphere model, SAMI3, has been demonstrated. The model self-consistently solves for the neutral wind driven dynamo electric field and the gravity driven electric field associated with plasma bubbles.

Developed by Dr. Joseph Huba and Dr. Glenn Joyce at the NRL Plasma Physics Division, SAMI3 is a fully three-dimensional model of the low- to mid-latitude ionosphere. SAMI3 has been modified recently to use a sun-fixed coordinate system to eliminate rotation of the dawn-dusk line and a high-resolution longitudinal grid to capture the evolution of equatorial plasma bubbles in the pre- to post-sunset sector.

The new modeling capability with SAMI3 has found that ESF can be triggered by pre-sunset ionospheric density perturbations and that an existing ESF plasma bubble can trigger a new bubble.

"Understanding and modeling ESF is important because of its impact on,"said Dr. Joseph Huba, head of the Space Plasma Physics Section of the Beam Physics Branch."ESF anomalies can cause radio wave scintillation that degrades communication and navigation systems and serves as the primary focus of the Air Force Communications/ Navigation Outage Forecast System.

Post-sunset ionospheric irregularities in the equatorial F-region were first observed in 1938 byresearchers, H.G. Booker and H.W. Wells at the Carnegie Institution of Washington. During that time, analysis of the scattering ofby the F-region of the ionosphere at an equatorial location (Huancayo, Peru) revealed ESF is fundamentally a nighttime event, with greatest frequency of occurrence in the period from four hours before midnight to four hours after midnight.

"The ionosphere builds up after sunrise and reaches a maximumin mid-afternoon, said Huba."Subsequently, the ionosphere can be lifted to higher altitudes just after sunset because of the pre-reversal enhancement of the eastward. During this time the ionosphere can become unstable."

The F-region of the ionosphere is home to the F-layer, or Appleton layer, and is the densest part of the ionosphere as it extends from about 200 km to more than 500 km above the surface of Earth. Beyond this layer is the topside ionosphere. Here extreme ultraviolet solar radiation ionizes atomic oxygen. The F-layer consists of one layer at night, but during the day, a deformation often forms creating layers labeled F1and F2. The F-region is the region of thethat is very important for high-frequency (HF) radio wave propagation facilitating HF radio communications over long distances.

The upgraded version of SAMI3 represents a unique resource to investigate the physics of equatorial spread F, particularly the processes that control the day-to-day variability of ESFs. Future improvements to the current model include: modification to the geomagnetic field to have a tilt allowing the inclusion of longitudinal effects; coupling SAMI3 with a physics-based model of the thermosphere; and replacement of the full donor cell algorithm, currently being used for crossfield transport, with a high-order flux transport algorithm allowing for the capture of complex bubble evolution involving bifurcation.


Source

Saturday, January 15, 2011

NRL begins field tests of laser acoustic propagation

An NRL research team led by physicist, Dr. Ted Jones, Plasma Physics Division, performed the first successful long distance acoustic propagation and shock generation demonstration of their novel underwater photo-ionization laser acoustic source. These tests, performed at the Lake Glendora Test Facility of Naval Surface Warfare Center-Crane, expanded on their earlier laboratory research on pulsed laser propagation through the atmosphere.

Using a pulsed Nd:YAG (Neodymium-doped Yttrium Aluminum Garnet) 532 nanometer wavelengthhoused in a floating platform, pulses were directed by steering mirrors down through a focusing lens and into the water surface. Each laser pulse produced an acoustic pulse with a sound pressure level of approximately 190 decibels (dBs), which was detected and measured by boat-mounted hydrophones at distances up to 140 meters, roughly the length and a half of a football field. Prior laboratory acoustic propagation distances were limited to about three meters.

"The goal of this laser acoustic source development is to enable efficient remote acoustic generation from compact airborne and ship-borne lasers, without the need for any source hardware in the water,"said Jones."This new acoustic source has the potential to expand and improve both Naval and commercial underwater acoustic applications."

The driving laser pulse has the ability to travel through both air and water, so that a compact laser on either an underwater or airborne platform can be used for remote acoustic generation. A properly tailored laser pulse has the ability to travel many hundreds of meters through air, remaining relatively unchanged, then quickly compress upon entry into the water. Atmospheric laser propagation is useful for applications where airborne lasers produce underwater acoustic signals without any required hardware in the water, a highly useful and efficient tool for undersea communications from aircraft.


Source

Friday, January 14, 2011

Plasma as a fast optical switch

Laser uses relativistic effects to turn otherwise opaque plasma transparent, creating an ultra-fast optical switch useful in next-generation particle accelerators.

Just like an electrical switch allows the flow of electricity into electrical circuits, relativistic transparency in plasma can act like a fast optical switch allowing the flow of light through otherwise opaque plasma. Modern day lasers, such as the Tridentin Los Alamos National Laboratory delivers a 200 terawatt power pulse (roughly 400 times the average electrical consumption of the United States) in half a trillionth of a second (picosecond) time. When the laser power reaches a threshold limit, relativistic transparency in plasma turns the initially opaque plasma transparent in less than a tenth of a picosecond.

Powerful lasers are used to drive plasmas in next-generation particle accelerators and x-ray beams. One shortcoming of these beams is that they typically have a range of energy, caused by the gradual rise of laser power from zero to its maximum level. Using an optical switch, this ramp up time can be reduced to less than a tenth of a picosecond, delivering peakto the plasma on a faster time scale.

So, how does this relativistic transparency happen inside plasma? When ais incident on (or strikes) plasma, electrons in the plasma react to the laser to cancel its presence inside the plasma. But when the laser is powerful enough to accelerate electrons close to the speed of light, the mass of the electrons increases, making them"heavier."These heavier electrons cannot react quickly enough; hence the laser beam propagates through the plasma.

Now, for the first time, scientists at Los Alamos National Laboratory and Ludwig-Maximilian Universität (LMU) in Germany have been able to make a direct observation of relativistic transparency in thin plasmas using a Frequency-Resolved Optical Gating (FROG) device. The discovery was made possible by two key capabilities: the ability to fabricate carbon foils a few nanometers thick to produce thin plasma, and the elimination of optical noise preceding the Trident laser pulse on a few picosecond timescale.

Initially, the researchers observed pulse shortening due to relativistic transparency and consistent spectral broadening. Later, they also measured the shape of the laser pulses incident on and transmitted through theto directly observe the transparency. The transmitted laser pulse is roughly half the duration of the incident laser pulse, with a transparency turn on time around a fifth of a picosecond. The experimental results are well consistent with that of computer simulation, except the loss of fast turn-on time due to propagation effects arising from diffraction. Efforts are currently underway to eliminate diffraction limitations to observe the true turn-on time.


Source

Tuesday, January 11, 2011

Wave power could contain fusion plasma

Researchers at the University of Warwick’s Centre for Fusion Space and Astrophysics and the UK Atomic Energy Authority’s Culham Centre for Fusion Energy may have found a way to channel the flux and fury of a nuclear fusion plasma into a means to help sustain the electric current needed to contain that very same fusion plasma.

The researchers used large scale computer simulations to confirm a longstanding prediction by US researchers that highalpha particles born in fusion reactions will be key to generating fusion power in the next planned generation of tokamaks.

The Warwick and Culham researchers were modelling the interaction of particular types of waves with alpha particles in awhen they found that an expected type of wave was forming naturally within the plasma and that it was quickly growing in strength. As the simulation progressed the wave began to transfer energy from alpha particles to make an electric current which could help confine the plasma.

This particular type of waves, LH (lower hybrid) waves, are in fact often used by fusion researchers to generate therequired to confine and control the plasma– but these waves are usually generated externally to the plasma and channelled into it to create the current. The Warwick researchers’ model suggests that in fact thesewill occur naturally in the plasmas of fusion reactors and in doing so may be able to help exploit the energy of alpha particles. This would open up far more efficient methods of creating and sustaining the current needed to confine the plasma and could provide a mechanism that would confirm earlier predictions by US researchers, that the energy ofwould be key to the development of fusion energy.

This work was only possible using the recently commissioned large scale computing facilities at the University of Warwick supported by EPSRC, in particular for theoretical work supporting fusion energy generation.

University of Warwick researcher Professor Sandra Chapman said:

“These large scale computer simulations capture the plasma dynamics in unprecedented detail and have opened up an exciting new area.”


Source

Tuesday, December 7, 2010

Researcher uses 100,000 degree heat to study plasma

Researcher uses 100,000 degree heat to study plasma

Enlarge

Using one of the greatest sources of radiation energy created by man, University of Nevada, Reno researcher and faculty member Roberto Mancini is studying ultra-high temperature and non-equilibrium plasmas to mimic what happens to matter in accretion disks around black holes.

Physics department professor and chair Mancini has received a $690,000 grant from the U.S. Department of Energy to continue his research in high energy density plasma; plasmas are considered to be the fourth state of matter. He will serve as principal investigator for a project titled"Experiments and Modeling of Photo-ionized Plasmas at Z."

"Receiving awards such as this exemplifies the academic caliber and national importance of the work in our Physics Department,"Jeff Thompson, dean of the College of Science said."We're proud of the team of researchers here working on cutting-edge science."

Mancini has been studying the atomic and radiation properties of high-energy density plasmas for more than 15 years, and this new grant will allow him to further explore what happens to matter when it is subjected to extreme conditions of temperature and radiation - similar to what happens to many astrophysical objects in the universe.

The research will enable astrophysicists to better understand what happens aroundand in active galactic nuclei. Scientists will also better understand the application of high-energy density plasmas to energy production, such as controlled(produced in the laboratory), and production of X-ray sources for a variety of applications.

"Using theories and tools created here at the University to design and analyze experiments, we then go to the only national facility that has the capacity to deliver the high-intensity flux of X-rays required to perform and measure these experiments,"Mancini said."We custom build instrumentation in our machine shop that meets the high standard set by the national facility so that it will fit onto the target chamber of the pulsed-power Z-machine, enabling us to conduct this unique experiment."

The pulsed-power machine at the Sandia National Laboratories in New Mexico (similar in concept but larger than the University's Nevada Terawatt Facility Zebra accelerator) is the most powerful source of X-rays on earth, Mancini said.

"We subject a very small cell - a 1-inch by½-inch cube - filled with a gas, such as neon, to this tremendous, short burst of X-ray energy,"he said."It's about 10 nanoseconds of the most intense power on earth - creating conditions of hundreds of thousands of degrees and millions of atmospheres in pressure - in the form of X-rays."

The researchers can then compare their extensive computer modeling and calculations with the measurements so they can study and explain the extreme state of matter (plasma) created during those 10 nanoseconds, which mimics the majority of matter found throughout the universe.

"We are using a unique imaging X-ray spectrometer to measure the intensity distribution of radiation as a function of wavelength, which tells us what happens with the plasma,"Mancini said. From detailed analysis of the data, Mancini can extract the plasma's density, ionization and temperature.

He said the plasma reaches extreme conditions, very unlike the low-energy plasma found in a neon light or a plasma television screen, with light 1,000 times more energetic than visible light, temperature as high as 100,000 degrees Fahrenheit, and ionization mainly driven by the action of the X-ray flux going through the.

The University of Nevada, Reno Physics Department has a team of about 20 scientists, faculty and research associates working on a variety of projects in the field of High Energy DensityPhysics Research. Mancini emphasized that having strong research programs is critical for the quality of education and training that the University can provide to students.

Source: University of Nevada, Reno


Source

Monday, December 6, 2010

Signs of ideal surfing conditions spotted in ocean of solar wind

(PhysOrg.com) -- Researchers at the University of Warwick have found what could be the signal of ideal wave"surfing"conditions for individual particles within the massive turbulent ocean of the solar wind. The discovery could give a new insight into just how energy is dissipated in solar system sized plasmas such as the solar wind and could provide significant clues to scientists developing fusion power which relies on plasmas.

The research, led by Khurom Kiyanai and Professor Sandra Chapman in the University of Warwick's Centre for Fusion, Space and Astrophysics, looked at data from the Cluster spacecraft quartet to obtain a comparatively"quiet"slice of the solar wind as it progressed over an hour travelling covering roughly 2,340,000 Kilometres.

In space, on these large scales, and quiet conditions, nature provides an almost perfect experiment to study turbulence which could not be done on Earth in a laboratory. This plasma energy does eventually dissipate. One obvious way of understanding how such energetic plasma could dissipate this energy would be if the particles within the plasma collided with each other. However the solar wind is an example of a"Collisionless Plasma". The individual particles within that flow are still separated by massive distances so cannot directly interact with each other. They typically collide only once or twice with anything on their journey from the Sun to the Earth.

The University of Warwick Centre for Fusion, Space and Astrophysics led team drilled down into the data on this 2,340,000 Kilometres zooming down to see how the turbulence works on these different length scales which might provide some clue as to how the plasma was able to dissipate energy.

When the researchers were able to make observations all the way down to about I kilometre they could resolve the behaviour of individual particles within the total 2,340,000 kilometres slice of. These regions, which held just one particle of the plasma, were themselves almost a kilometre in size. The researchers were surprised to see a new kind of turbulence on these small scales.

At this particular scale they saw that the levels of turbulence switched from being mutlifractal to single fractal pattern. This single fractal pattern turbulence appears just right to create and sustain waves that can interact with the individual particles in the. University of Warwick astrophysicist Khurom Kiyani said:"The particles in this"collisionless plasma"may too spread out to collide with each other but this could indicate that they can, and do, interact with waves and surfing these ideal waves is what allows them to dissipate their energy."

University of Warwick astrophysicist Professor Sandra Chapman said"We have been able to drill down through a vast ocean of data covering well over two million kilometres to get an insight in to what is happening in an area about the size of a beach, and on all length scales in between. We believe we are seeing waves on that beach that are providing the ideal surfing conditions to allow plasma particles to exchange energy without collisions."

Professor Sandra Chapman also said"These results are not just an interesting piece of astrophysics as the work has been led by a 'Centre for Fusion, Space and Astrophysics' the results have also immediately come to the attention of our colleagues working to increase the stability of plasmas involved in the generation of fusion energy. Turbulence is a big problem in keeping the hot plasma confined long enough for burning to take place to generate fusion power."

More information:The research entitled Global Scale-Invariant Dissipation in Collisionlesshas just been published inPhysical Review Letters.

Source: University of Warwick (news:web)


Source

Sunday, December 5, 2010

Cool plasma packs heat against biofilms

Though it looks like a tiny purple blowtorch, a pencil-sized plume of plasma on the tip of a small probe remains at room temperature as it swiftly dismantles tough bacterial colonies deep inside a human tooth. But it's not another futuristic product of George Lucas' imagination. It's the exciting work of USC School of Dentistry and Viterbi School of Engineering researchers looking for new ways to safely fight tenacious biofilm infections in patients - and it could revolutionize many facets of medicine.

Two of the study's authors are Chunqi Jiang, a research assistant professor in the Ming Hsieh Department of Electrical Engineering-Electrophysics, and Parish Sedghizadeh, assistant professor of clinical dentistry and Director of the USC Center for Biofilms."Nanosecond Pulsed Plasma Dental Probe"appears in the June 2009 issue ofPlasma Processes and Polymers.

Sedghizadeh explained that biofilms are complex colonies of bacteria suspended in a slimy matrix that grants them added protection from conventional antibiotics. Biofilms are responsible for many hard-to-fight infections in the mouth and elsewhere. But in the study, biofilms cultivated in the root canal of extracted human teeth were easily destroyed with the plasma dental probe, as evidenced by scanning electron microscope images of near-pristine tooth surfaces after plasma treatment.

Plasma, the fourth state of matter, consists of electrons, ions, and neutral species and is the most common form found in space, stars, and lightning, Jiang said. But while many natural plasmas are hot, or thermal, the probe developed for the study is a non-thermal, room temperature plasma that's safe to touch. The researchers placed temperature sensors on the extracted teeth before treatment and found that the temperature of the tooth increased for just five degrees after 10 minutes of exposure to the plasma, Jiang said.

The cooler nature of the experimental plasma comes from its pulsed power supply. Instead of employing a steady stream of energy to the probe, the pulsed power supply sends 100-nanosecond pulses of several kilovolts to the probe once every millisecond, with an average power less than 2 Watts, Jiang said.

"Atomic oxygen {a single atom of oxygen, instead of the more common O2 molecule} appears to be the antibacterial agent,"according to plasma emission spectroscopy obtained during the experiments, she said.

Sedghizadeh said the oxygen free radicals might be disrupting the cellular membranes of the biofilms in order to cause their demise and that the plasma plume's adjustable, fluid reach allowed the disinfection to occur even in the hardest-to-reach areas of the root canal.

Given that preliminary research indicates that non-thermal plasma is safe for surrounding tissues, Sedghizadeh said he was optimistic about its future dental and medical uses. Much like the spread of laser technology from research and surgical applications to routine clinical and consumer uses, plasma could change everything; especially since nonthermal plasmas don't harbor the risks of tissue burns and eye damage that lasers do, he said.

"Plasma is the future,"Sedghizadeh said."It's been used before for other sterilization purposes but not for clinical medical applications, and we hope to be the first to apply it in a clinical setting."

"We believe we're the first team to applyfor biofilm disinfection in root canals,"Jiang added."This collaboration is very unique. We're attacking frontier problems, and we're happy to be broadening our fields."

Source: University of Southern California (news:web)


Source

Saturday, December 4, 2010

Scientists Control Plasma Bullets

Scientists Control Plasma Bullets

Enlarge

(PhysOrg.com) -- On the nanoscale, things aren’t always what they seem. What first looked like a continuous plasma jet has turned out to be a train of tiny, high-velocity plasma bullets. Using a camera with an exposure time of a few nanoseconds, researchers have further investigated the plasma bullets, and have even found a way to control them.

Using a high-speed intensified charge coupled device (ICCD), Professor Mounir Laroussi and his students from the Laser&Plasma Engineering Institute at Old Dominion University in Norfolk, Virginia, has taken an up-close look at the little-known plasma bullets. Their study is published in a recent issue of theJournal of Physics D: Applied Physics.

The plasma bullets are created by a“plasma pencil,” which is a pulsed plasma source that the researchers previously developed. The plasma pencil is a hollow tube about 2.5 cm in diameter that contains two copper electrodes. To ignite the plasma, the researchers sent a gas mixture of helium and oxygen through holes in the electrodes, and applied high-voltage electric pulses between the electrodes. When the gas ignited between the electrodes, it launched a plasma plume through the hole of the outer electrode up to 5 cm into the air.

Scientists Control Plasma Bullets
Enlarge

(Left) Photograph of a plasma bullet taken with an ICCD camera, illustrating the bullet’s donut shape. (Right) An externally applied dc voltage causes the plasma plume to bend in the opposite direction. Image credit: Mericam-Bourdet, et al.

The plasma plume (which is actually a train of plasma bullets) moves at a velocity of up to 100,000 meters per second - much faster than the velocity of the gas coming out of the device, which is just 8 meters per second. Although previous research has explained that photoionization could be responsible for the high velocity, Laroussi and his students at Old Dominion have now found clues to the bullets’ original formation.

In their study, the researchers found that the length of the electrically-driven plume depends mainly on two parameters: the applied voltage between the two electrodes and the helium gas flow. Also, the average bullet velocity increases when the voltage increases. By analyzing images from the ICCD camera, the scientists also found that the bullets always become extinguished when the voltage pulse ends.

By viewing the plasma bullets at multiple angles, the researchers found another surprise: the bullet is not round, but is shaped like a donut, with a hole in the middle. Based on this shape, the researchers proposed that the plasma bullets are surface waves that travel along the interface between two media - helium and ambient air.

In addition, the researchers found that they could control the initiation time and distance of the plasma bullets by applying an external dc electric field. The applied field decreased the bullets’ average velocity and distance traveled. Also, by applying the electric field perpendicular to the axis of the plasma plume, the negatively charged plume is deflected away from the negatively charged field.

As Laroussi explained, the aim of the study was to attempt to understand the physics behind the formation and propagation of these cold plasma bullets.“There has been a lot of debate as to how these bullets propagate. So we hope that we have contributed some interesting ideas to this debate,” he toldPhysOrg.com, adding that still more work needs to be done.

Laroussi also said that the plasma bullets could be used for biomedical purposes, such as dental and wound healing applications. Teaming up with microbiologists, Laroussi has already used the tiny plasma bullets to inactivate bacteria, especially those of dental relevance such asStreptococcus mutanswhich are implicated in the onset and progression of dental caries (tooth decay).

More information:Mericam-Bourdet, N.; Laroussi, M.; Begum, A.; and Karakas, E.“Experimental investigations of plasma bullets.”J. Phys. D: Appl. Phys. 42 (2009) 055207 (7pp).

Copyright 2009 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.


Source

Friday, December 3, 2010

Physicists produce black hole plasma in the lab

The last cry from the black hole

Enlarge

(PhysOrg.com) -- Black holes are voracious: They devour large amounts of matter from gas clouds or stars in their neighbourhood. As the incoming"food"spirals faster and faster into the abyss, it becomes denser and denser, and heats up to temperatures of many millions of degrees Celsius. Before the matter finally disappears, it emits extraordinarily intense X-rays into space. This"last cry"originates from iron, one of the elements contained in this matter. Researchers at the Max Planck Institute for Nuclear Physics in Heidelberg have collaborated with colleagues at the Helmholtz Zentrum Berlin and used the BESSY II synchrotron X-ray source to investigate what happens in this process.

In order to understand the nature of black holes, it is best to watch them feeding. The most interesting part is just before the matter disappears behind the event horizon - that is, the distance at which the mass attraction of the black hole becomes so strong that not even light can escape. This turbulent process generates X-rays, which in turn excite variousin the cloud of matter to emit X-rays themselves with characteristic lines ("colours"). An analysis of the lines provides information on the density, velocity and composition of the plasmas near the event horizon.

During this process iron plays an important role. Although it is not as abundant in the universe as lighter elements - mainly hydrogen and helium - it is much better at absorbing and reemitting X-rays. Theemitted thereby also have a higher energy, respectively a shorter wavelength (a different"colour"), than that of the lighter atoms.

They therefore leave behind clear fingerprints in the rainbow of the dispersed radiation: in the spectrum they reveal themselves as strong lines. The so-called K-alpha line of iron is the final visible spectral signature of matter, its"last cry", before it disappears behind theof a black hole, never to be seen again.

The X-rays emitted are also absorbed as they pass through the medium surrounding the black hole at larger distances. And here iron again leaves behind clear fingerprints in the spectra. The radiation ionises the atoms several times and so-called photoionisation typically strips away more than half of the 26 electrons which the iron atoms usually contain. This produces ions with positive charge states that correspond to the number of stripped electrons. The end result is highly charged ions produced not by collisions but by radiation.

It is precisely this process, the stripping of further electrons from highly charged ions by incident X-rays, which researchers at the Max Planck Institute forhave reproduced in the laboratory in collaboration with colleagues at BESSY II - the Berlin synchrotron X-ray source. The heart of the experiment was the EBIT electron beam ion trap designed at the Max-Planck institute. Inside the trap, iron atoms were heated up with the aid of an intense electron beam as they would be deep inside the sun or, as in this case, in the vicinity of a black hole.

Under such conditions, iron exists, for example, as the Fe14+ion, ionised fourteen times as it were. The experiment proceeds as follows: A cloud of these ions, only a few centimetres long and thin as a hair, is kept suspended in an ultra-high vacuum with the help of magnetic and electric fields. X-rays from the synchrotron then impact on this cloud; the photon energy of theis selected by a"monochromator"with extreme precision and directed onto the ions as a thin, focused beam.

The last cry from the black hole
Enlarge

The researchers use EBIT, the electron beam ion trap, to reconstruct processes in the laboratory as they occur in the matter around black holes. Image: MPI for Nuclear Physics

The spectral lines measured in this experiment can be directly and easily compared with the most recent observations made by X-ray observatories, like Chandra and XMM-Newton. It turns out that most of the theoretical calculation methods used do not predict the line positions accurately enough. This is a big problem for the astrophysicists, because without accurate knowledge of the wavelengths there is no accurate determination of the so-called Doppler effect of these lines.

The Doppler effect describes the change in frequency (energy or wavelength) of the emitted light as a function of the velocity of the source (the ions in the plasma.). Anyone who listens to the siren of a passing ambulance experiences this phenomenon: as long as the vehicle approaches, the perceived pitch of the sound is higher; as it moves away, it is lower. If the frequency in the system at rest is known (ambulance is stationary), measuring the pitch makes it possible to determine the velocity of the source - in astronomy this is the plasma.

This left the scientists puzzled over the interpretation of NGC 3783, one of the active galactic nuclei which have been under investigation for the longest time. The error bars in the frequency in a rest frame calculated with the aid of different theoretical models led to such large uncertainties in the derived velocity of the emitting plasma that reliable statements on theflows were no longer possible.

The laboratory measurements of the Heidelberg-based Max-Planck researchers have now identified one theoretical method among several model calculations that provides the most accurate predictions. They also achieved the highest spectral resolution to date in this wavelength range. It had previously not been possible to experimentally check the different theories in this energy range with such high accuracy.

The novel combination of a trap for highly charged ions and brightradiation sources thus represents an important step and a new approach for understanding the physics in the plasmas aroundor active galactic nuclei. The researchers expect the combination of EBIT spectroscopy and brighter and brighter X-ray sources of the third (PETRA III at DESY) and fourth generation (free-electron laser XFEL, Hamburg/Germany; LCLS, Stanford, USA; SCSS, Tsukuba, Japan) to bring fresh drive to this field.


Source

Thursday, December 2, 2010

Scientists Generate Black Hole Radiation in the Lab

Scientists Generate Black Hole Radiation in the Lab

Enlarge

(PhysOrg.com) -- Due to their violent nature and long distance from Earth, black holes and their surroundings are very difficult to study. Currently, the main method to observe a black hole is to use an X-ray satellite to detect the X-ray fluorescence emitted by a black hole’s companion star as the star’s material falls into the black hole. But now, scientists have developed a laser-driven method to generate a flash of brilliant Planckian X-rays in the lab that can be used to simulate the X-rays that exist near black holes. The new results contrast with the generallyaccepted explanation for the origins of these astronomical features, and may also help scientists test the complex computer codes used in X-ray astronomy.

The team of researchers, Shinsuke Fujioka, et al., from Osaka University, the Chinese Academy of Sciences, the Korea Atomic Energy Research Institute, and Shanghai Jiao Tong University, have published their study on creating Planckian X-rays in the laboratory in a recent issue of.

In their study, the researchers used a direct laser-driven implosion to create a hot, dense. They aimed 12 intense laser beams (for a total of 3 billion watts, and carrying 4.0 kJ {kilojoules} of energy) onto a micrometer-sized spherical hollow plastic shell. When the shell’s core imploded, its temperature approached 1 keV (kiloelectronvolt), creating a hot plasma. With other adjustments to the set-up, the researchers could produce a slowly expanding, cool plasma, much like the astronomical plasma observed near. In the laboratory-generated plasma, the researchers detected the emitted X-rays and measured their spectra.

They identified two characteristic spectral peaks that closely resemble the spectral peaks observed in the binary systems Cygnus X-3 and Vela X-1. In the model of Cygnus X-3, which consists of a black hole and a companion star, the gravitational energy of the star’s accreting material is converted into thermal energy, which is the origin of the radiation emitted by the accretion disk. The X-ray spectra of Cygnus X-3 was previously observed by an X-ray spectrometer onboard the Chandra X-ray satellite.

“Astronomers use computer simulation codes to interpret their observational data, e.g. x-ray spectra and x-ray images,” Fujioka told PhysOrg.com. “Because matter near a black hole is in extreme conditions (very hot and very massive), which was difficult to be reproduced on the Earth, astronomerscould not validate their simulation results with valid experimental data; namely, astronomers were not sure whether their simulation results and their interpretations were correct or not.

“Furthermore, astronomers cannot directly measure temperature, density, and pressure of astronomical objects; there are many unknown parameters to interpret their observations. On the other hand, we can easily measure them in the laboratory. Our experimental technique offers astronomers a test bedto validate their models and simulations by comparing them to the experimental results obtained under well-characterized extreme conditions.”

Although the X-ray spectra obtained in the lab resemble those observed astronomically, their interpretations are very different, and even contradictory. Most significantly, the first spectral peak in the two binary systems is thought to be a forbidden resonance line of helium-like silicon ions. However, as Fujioka explained, these differences could help astronomers test the computer codes used in X-ray astronomy modeling.

“X-ray spectroscopy of photoionized plasma near a black hole is an important tool to study the evolution of a black hole,” Fujioka said. “Astronomers can reproduce their observational data even with incorrect or wrong models owing to adjusting the unknown parameters. If their codes are not valid,characteristics (temperature, density, mass, pressure etc.) of the binary systems may be changed. We hope that our result improves their understanding of the birth, growth, and death of a black hole.”

More information:Shinsuke Fujioka, et al.“X-ray astronomy in the laboratory with a miniature compact object produced by laser-driven implosion.”Nature Physics, Vol. 5, November 2009.Doi:10.1038/NPHYS1402

Copyright 2009 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.


Source

Wednesday, December 1, 2010

Scientists unlock the secrets of exploding plasma clouds on the sun

Scientists unlock the secrets of exploding plasma clouds on the sun

Enlarge

Twisted"ropes"of magnetic field lines erupt from the Sun and tanglewith the Earth's magnetic field.

The Sun sporadically expels trillions of tons of million-degreein explosions called coronal mass ejections (CMEs). Such clouds -- an example is shown in Figure 1 -- are enormous in size (spanning millions of miles) and are made up of magnetizedgases, so hot thatare ionized. CMEs are rapidly accelerated by magnetic forces to speeds of hundreds of kilometers per second to upwards of 2,000 kilometers per second in several tens of minutes. CMEs are closely related to solar flares and, when they impinge on the Earth, can trigger spectacular auroral displays. They also induce strongin the Earth's plasma atmosphere (i.e., theand), leading to outages in telecommunications and GPS systems and even the collapse of electric power grids if the disturbances are very severe.

Since the first observation of ain 1859, solar eruptions ("explosions") have attracted much attention from scientists around the world and have been studied with a succession of increasingly sophisticated international satellite missions in the past three decades. A major challenge has been that enormous and complicated plasma structures accelerating away from the Sun can only be observed remotely. As a result, it has been difficult to testto establish a correct understanding of the mechanisms that cause such eruptions. But in 2006, an international twin-satellite mission called STEREO was launched to continuously observe the erupting plasma structures from the Sun to the Earth.

Scientists unlock the secrets of exploding plasma clouds on the sun
Enlarge

This is an artist's rendition of an expanding model CME flux rope, which is about to impinge on the Earth. The dark blue represents a weak calculated magnetic field (of the order of 15 nanotesla) while red shows a strong field (of the order of 1 gauss). One representative magnetic"field line"is illustrated. Credit: J. Chen and V. Kunkel

Now, using the data from STEREO, new research by scientists at the Naval Research Laboratory (NRL) in Washington, D.C., demonstrates for the first time that the observed motion of erupting plasma clouds driven by magnetic forces can be correctly explained by a theoretical model. The work will be presented at the 52nd Annual Meeting of the APS Plasma Physics Division.

The theory, controversial when it was first proposed in 1989 by Dr. James Chen of NRL, is based on the concept that an erupting plasma cloud is a giant"magnetic flux rope,"a rope of"twisted"shaped like a partial donut. Chen and Valbona Kunkel, a doctoral student at George Mason University, have applied this model to the new STEREO data of CMEs and shown that the theoretical solutions agree with the measured trajectories of the ejected clouds within the entire field of view from the Sun to the Earth.

The position of the leading edge (LE) of a CME that erupted on December 24, 2007 were tracked by the STEREO-A spacecraft from the earliest stages of eruption to its arrival at 1 AU approximately five days later. The magnetic field and plasma parameters were measured by the STEREO-B spacecraft. The agreement between theory and data is within 1 percent of the measured position of the LE. Chen and Kunkel's results show that the theoretically predicted magnetic field and plasma properties are in excellent agreement with the measurements aboard STEREO-B. This is the first model that can replicate directly observed quantities near the Sun and the Earth as well as the actual trajectories of CMEs. Prior to STEREO, the motion of CMEs in the region corresponding to HI1 and HI2 data was not observed.

Interestingly, the basic forces acting on solar flux ropes are the same as those in laboratory plasma structures such as tokamaks developed to produce controlled fusion energy. The mechanism described by the theory is also potentially applicable to eruptions on other stars.


Source

Tuesday, November 30, 2010

Taming thermonuclear plasma with a snowflake

Taming thermonuclear plasma with a snowflake

Enlarge

Physicists working on the National Spherical Torus Experiment (NSTX) at the Princeton Plasma Physics Laboratory are now one step closer to solving one of the grand challenges of magnetic fusion research -- how to reduce the effect that the hot plasma has on fusion machine walls (or how to tame the plasma-material interface).

Some heat from the hot plasma core of a fusion energy device escapes the plasma and can interact with reactor vessel walls. This not only erodes the walls and other components, but also contaminates the plasma -- all challenges for practical fusion. One method to protect machine walls involves divertors, chambers outside the plasma into which the plasma heat exhaust (and impurities) flow. A new divertor concept, called the"snowflake,"has been shown to significantly reduce the interaction between hot plasma and the cold walls surrounding it.

Strong magnetic fields shape the hot plasma in the form of a donut in aplasma reactor called a tokamak. As confined plasma particles move along magnetic field lines inside the tokamak, some particles and heat escape because of instabilities in the plasma. Surrounding the hot plasma is a colder plasma layer, the scrape-off layer, which forms the plasma-material interface. In this layer, escaped particles and heat flow along an"open"magnetic field line to a separate part of the vessel and enter a"divertor chamber."If the plasma striking the divertor surface is too hot, melting of the plasma-facing components and loss of coolant can occur. Under such undesirable conditions, the plasma-facing component lifetime would also be an issue, as they would tend to wear off too quickly.

While the conventional magnetic X-point divertor concept has existed for three decades, a very recent theoretical idea and supporting calculations by Dr. D.D. Ryutov from Lawrence Livermore National Laboratory have indicated that a novel magnetic divertor -- the"snowflake divertor"-- would have much improved heat handling characteristics for the plasma-material interface. The name is derived from the appearance offorming this novel magnetic interface.

Taming thermonuclear plasma with a snowflake
Enlarge

This is a"snowflake"divertor -- a novel plasma-material interface is realized in the National Spherical Torus Experiment. Credit: V. Soukhanovskii, Lawrence Livermore National Laboratory

This magnetic configuration was recently realized in NSTX and fully confirmed the theoretical predictions. The snowflake divertor configuration was created by using only two or three existing magnetic coils. This achievement is an important result for future tokamak reactors that will operate with few magnetic coils. Because the snowflake divertor configuration flares the scrape-off layer at the divertor surface, the peak heat load is considerably reduced, as was confirmed by the divertor heat flux on NSTX. The plasma in the snowflake divertor, instead of heating the divertor surface on impact, radiated theaway, cooled down and did not erode the plasma-facing components as much, thus extending their lifetime. Plasma TV images show more divertor radiation in the snowflake divertor plasmas in comparison with the standard plasmas. Importantly, the snowflake divertor did not have an impact on the high performance and confinement of the high-temperature core plasma, and even reduced the impurity contamination level of the main.

These highly encouraging results provide further support for the snowflake divertor as a viable plasma-material interface for future tokamak devices and for fusion development applications.


Source

Monday, November 29, 2010

Vacuum arcs spark new interest

Vacuum arcs spark new interest

Enlarge

Whenever two pieces of metal at different voltages are brought near each other, as when an appliance is plugged into a live socket, there is a chance there will be an arc between them. Most of the arcs people see are a breakdown of the gas between the metal surfaces, but this type of breakdown can also occur in a vacuum. This vacuum breakdown, which until recently has not been well understood, has implications for applications from particle accelerators to fusion reactors.

As part of an effort to understand the maximum accelerating field in particle accelerators, scientists at Argonne National Laboratory have been modeling the processes involved in vacuum breakdown. Now, a new model of this phenomenon is beginning to reveal what is happening in these arcs, and scientists are studying a number of new phenomena associated with them.

In this new model, the breakdown arc is triggered by the electric field in thegap literally tearing the metal apart. (The same force that causes"static cling"can be very powerful for high electric fields, particularly at tiny corners, and in cracks where the fields are intensified by the local geometry of the surface.) After the metal is torn apart, the fragments should become ionized and form microscopic plasmas that are very dense and cold (for a plasma). Because of the high densities in these plasmas, the surface fields inside the arc quickly become even stronger than they were at breakdown. The arc becomes very damaging to the metal surface over a comparatively large area, eventually leaving a pit that should be visible to the naked eye.

While this model seems to be internally consistent, researchers want to use it to produce predictions that can be verified experimentally. Current research is usingto show what happens at thewhen the material is torn apart, plasma modeling codes to show how the plasma initially forms and what its properties are, and electrohydrodynamics to show how the surface of the arc pit is affected. While current results seem generally consistent with existing experimental measurements, more precise tests are being developed.

In principle, a better understanding of the precise causes of electrical breakdown should suggest solutions that are relevant to fusion reactors and space communications, among other things.


Source

Sunday, November 28, 2010

Researchers pursue plasmonics and photonics technology for optical improvements

Professors Mark L. Brongersma of Stanford University and Stefan A. Maier of Imperial College London are investigating new applications for terahertz sensors.

Based on their research, these sensors could be used for improving optical sources, detectors and modulators for optical interconnections and for creating biomolecules, such as plastic explosives for the Air Force.

Brongersma's work is based on the unprecedented ability of nanometallic or plasmonic structures to concentrate light into deep-subwavelength volumes.

"Currently photodetectors, modulators and other chipscale devices are limited in their size by the fundamental laws of diffraction, but with plasmonics, we can make much more compact devices with one to two order of magnitude better performance parameters,"said Brongersma."As the size of these devices determines their operation speed and power, it's hard to make much more efficient devices."

Maier has demonstrated plasmon waveguides on a silicon platform operating in the telecom band, and under AFOSR support he has realized some of the first plasmonic devices operating at THz frequencies.

"The telecom band is important since that's where data communication is taking place by means of optical fibers and the Internet; the silicon platform is significant because most chips are made of that material,"said Maier."THz frequencies are vital for their sensing of dangerous substances, including plastic explosives and anthrax."

The study of plasmonics is bringing these scientists together as each works on fundamentals, information and biotechnology.

"Our team is working on demonstrating plasmon waveguides and cavities for a wide variety of applications spanning thefrom the visible to the microwave regime,"said Maier.

Brongersma's group has worked on the basic concepts behind plasmonics-enabled light concentration and manipulation and is exploring a wide range of applications including faster, nanostructures synthesis, solar cells, water splitting using photoelectrochemistry, quantum optics and sensing.

Dr. Gernot Pomrenke, a program manager for the AFOSR Physics and Electronics directorate has overseen the research of these scientists for many years and Brongersma credits him with being one of the first program managers in the U.S. to realize the potential importance of plasmonics.

For their outstanding AFOSR-funded experimental and theoretical research in nano-plasmonics and nano-photonics, Brongersma and Maier were awarded the 2010 Raymond and Beverly Sackler Prize in the Physical Sciences.

"We are very excited that our fields of research have gained sufficient visibility for us to become the topics of such a prestigious prize, and we are excited and honored to share the prize equally,"said Brongersma.


Source